Product Range
Scaffolding Fittings
Brosis International offers a comprehensive range of scaffolding fittings designed to ensure safety, durability, and efficiency in construction and industrial projects. Our fittings are manufactured to meet international standards, making them suitable for various scaffolding applications.
Form Work Products
Brosis International offers a wide range of formwork products designed for superior strength, durability, and reusability in construction projects. Our formwork solutions are crafted to ensure precision, efficiency, and cost-effectiveness, making them ideal for residential, commercial, and infrastructure projects.
Accessories
Brosis International offers a wide range of accessories to complement our scaffolding and formwork systems, ensuring strength, stability, and efficiency in construction projects. Our accessories are designed with high durability, easy installation, and international safety standards to meet the demanding needs of the industry.
Cuplock Standard
- Fabricated out of 48.3mm OD x 3.2mm thick high-grade steel tube.
- Every Standard is joined vertically using a Spigot.
- The lowest bottom cup is welded at 80mm from the bottom end of the standard, and the highest bottom cup is welded at 420mm from the upper end of the standard.
- All standards have the lower part of the cups at 0.5m intervals with captive rotating top-cups securing up to 4 components.
Cuplock Ledger
- Ledgers are used as the main horizontal connecting members for the Cuplock system.
- These are available in various lengths to provide the desired grid specification for scaffolding or formwork.
- The ledger blades fit into the bottom cups of the standards and are locked in place by the corresponding top cups.
- Ledgers are manufactured from 48.3mm OD x 3.2mm thick scaffolding tube with forged steel blades at both ends.
Cuplock Intermediate Transom
- Transoms are available in 8 different sizes to fit design and site requirements.
- Transoms are manufactured from 48.3mm OD x 3.2mm thick scaffolding tube.
- This member is also used for the supporting of Timber scaffolding boards when system decks are not used.
- Transom provides mid-bay support for scaffolding boards by spanning between the inner and outer ledgers.
- The Transom is designed such that it enables the splitting of a bay to create an opening between decked platforms.
Cuplock Swivel Face Braces
- It is a good practice to have one brace on every fourth bay and zigzag up the face of the scaffold.
- This member comes with a locking device to prevent any accidental movement of the member.
- Their function is to provide transverse and longitudinal bracing to scaffold structures, which removes the possibility of any ‘sway’ in the scaffold structure.
- Cuplock braces are manufactured from 48.3mm OD x 3.2mm thick scaffolding tube, and each brace has two swivel blade ends.
- Attach the braces with more versatility to any location using the Swivel Face Brace. It can also be used for mid or top guard rails.
- A Swivel Face Brace is used on the elevation or face of the scaffold to “lock” the Standard and Ledgers into a rigid bay.
Cantilever Frame
- Cantilever frames are designed with blade ends that can be easily fitted in the cup joint.
- The frame can also accept jacks in three positions at the other end at 1.2m, 1.25m, and 1.3m from the centerline of the standard.
- Cantilever Frames are used for providing support to decking or formwork at edges.
Double Cantilever Frame
- Double Cantilever has two blade ends connected to the standard to ensure a fixed connection with the Cuplock vertical Standard.
- This is used to provide vertical support for edge beams of slabs and transfer the applied load to the Cuplock Standard.
Beam Bracket
- Beam Brackets have two blade ends connected to the standard.
- This eliminates the need for the beam bottoms to be propped up from the ground.
- Beam Brackets are used to support drop beams engaged within the regular slab support grid.
- These are used to provide vertical support for internal beams of slabs and transfer the applied load.
- The Beam Brackets are capable of receiving adjustable jacks and standards for reaching the beam bottom level.
- It has a safe load carrying capacity of 20KN.
Adjustable Base Jack
- These fittings are available in two types (Hollow and solid).
- The adjustable base jacks provide 500mm of thread adjustment.
- The Adjustable Base Jacks are made of steel plate and screw jack.
- The adjustable threaded pipe is made of 4mm thick steel pipe with 38mm OD.
- These Jacks provide a method of adjustment for Cuplock structure. It fits directly into the Cuplock Standard.
Adjustable Base Jack
- These fittings are available in two types (Hollow and solid).
- The adjustable base jacks provide 500mm of thread adjustment.
- The Adjustable Base Jacks are made of steel plate and screw jack.
- The adjustable threaded pipe is made of 4mm thick steel pipe with 38mm OD.
- These Jacks provide a method of adjustment for Cuplock structure. It fits directly into the Cuplock Standard.