Product Range
Cantilever Frame
- Cantilever frames are designed with blade ends that can be easily fitted in the cup joint.
- The frame can also accept jacks in three positions at the other end at 1.2m, 1.25m, and 1.3m from the centerline of the standard.
- Cantilever Frames are used for providing support to decking or formwork at edges.
Double Cantilever Frame
- Double Cantilever has two blade ends connected to the standard to ensure a fixed connection with the Cuplock vertical Standard.
- This is used to provide vertical support for edge beams of slabs and transfer the applied load to the Cuplock Standard.
Beam Bracket
- Beam Brackets have two blade ends connected to the standard.
- This eliminates the need for the beam bottoms to be propped up from the ground.
- Beam Brackets are used to support drop beams engaged within the regular slab support grid.
- These are used to provide vertical support for internal beams of slabs and transfer the applied load.
- The Beam Brackets are capable of receiving adjustable jacks and standards for reaching the beam bottom level.
- It has a safe load carrying capacity of 20KN.
Adjustable Base Jack
- These fittings are available in two types (Hollow and solid).
- The adjustable base jacks provide 500mm of thread adjustment.
- The Adjustable Base Jacks are made of steel plate and screw jack.
- The adjustable threaded pipe is made of 4mm thick steel pipe with 38mm OD.
- These Jacks provide a method of adjustment for Cuplock structure. It fits directly into the Cuplock Standard.