Product Range
Cuplock Standard
- Fabricated out of 48.3mm OD x 3.2mm thick high-grade steel tube.
- Every Standard is joined vertically using a Spigot.
- The lowest bottom cup is welded at 80mm from the bottom end of the standard, and the highest bottom cup is welded at 420mm from the upper end of the standard.
- All standards have the lower part of the cups at 0.5m intervals with captive rotating top-cups securing up to 4 components.
Cuplock Ledger
- Ledgers are used as the main horizontal connecting members for the Cuplock system.
- These are available in various lengths to provide the desired grid specification for scaffolding or formwork.
- The ledger blades fit into the bottom cups of the standards and are locked in place by the corresponding top cups.
- Ledgers are manufactured from 48.3mm OD x 3.2mm thick scaffolding tube with forged steel blades at both ends.
Cuplock Intermediate Transom
- Transoms are available in 8 different sizes to fit design and site requirements.
- Transoms are manufactured from 48.3mm OD x 3.2mm thick scaffolding tube.
- This member is also used for the supporting of Timber scaffolding boards when system decks are not used.
- Transom provides mid-bay support for scaffolding boards by spanning between the inner and outer ledgers.
- The Transom is designed such that it enables the splitting of a bay to create an opening between decked platforms.
Cuplock Swivel Face Braces
- It is a good practice to have one brace on every fourth bay and zigzag up the face of the scaffold.
- This member comes with a locking device to prevent any accidental movement of the member.
- Their function is to provide transverse and longitudinal bracing to scaffold structures, which removes the possibility of any ‘sway’ in the scaffold structure.
- Cuplock braces are manufactured from 48.3mm OD x 3.2mm thick scaffolding tube, and each brace has two swivel blade ends.
- Attach the braces with more versatility to any location using the Swivel Face Brace. It can also be used for mid or top guard rails.
- A Swivel Face Brace is used on the elevation or face of the scaffold to “lock” the Standard and Ledgers into a rigid bay.